what to do when your shower valve wont shut off
You just came in from a hard day at work and yous are set up to become into your oasis to soak. The h2o is at the level y'all need and you plough the bathtub faucet. Nonetheless, the bathtub faucet won't turn off! Don't panic, but if the bathtub faucet won't turn off, shut off the water supply in the home. What could cause this to happen? Permit's detect out how to turn the primary water supply off, and what the causes could exist for this to happen. Besides, some home maintenance while you are investigating these areas, and when to call a professional.
Why You Need to Know What to Do If the Bathtub Faucet Won't Turn Off
In a situation like the above, you lot need to know where the chief water shut-off valve is located. In homes with a basement, it is normally located on an interior wall near the front of the firm and close to where the water meter would be. However, if your dwelling house is built on a slab, the master water shut-off valve is commonly located in the garage near the hot h2o heater or it may be in the grand. Likewise, turning off the h2o supply is essential to avoid flooding the dwelling.
The Bathtub Faucet Won't Plough Off: Causes
Valves Demand Replacing
The valves control the flow of the h2o and when they wear out, often they demand replacing. Contacting a professional is recommended as the valves volition need to exist taken out of the wall and replaced. This is not an easy task for someone who is unfamiliar with this type of plumbing issue.
The Faucet Handle is Damaged
Sometimes the problem is the handle is damaged. This handle has a stalk in the inside and allows the water to flow up through the faucet and then out into the bathtub. However, if the handle is cracked, it won't grip the stalk and you won't be able to turn the water off and so replacing is the but choice.
Bathtubs that take 2 handles are easier to have off and replace. More than modern handles though perchance a fiddling more than tricky. If you need help, contact a professional to help you.
Steps for Fixing the Faucet
1. Take hold of gloves and goggles to be safe before you start working.
2. Make sure the valve to the principal water supply is turned off. Every bit stated before, this is either in your basement or garage.
3. Accept your phone with you and have a picture of the faucet and handles. This is because it will exist easier to explicate to the plumber the problem. In improver, it will be helpful for you to observe replacement handles at the local hardware store or go on Amazon.
iv. Grab a apartment-blade screwdriver and pry underneath the cover plate and reveal the handle screw. Utilize a Phillips screwdriver to tighten the handle screw.
five. Plough the valve to the water main dorsum on and turn the faucet on and off to see if this stock-still the consequence. Yes? crawly! If not, bummer, and keep reading!
Fixing the Faucet Didn't Work? Next, Temporarily Fix the Stalk
1. Plough off the main water supply again. Remove the handle by turning it to the right and it should come off the stem. You may need to use a wrench or a gentle pull for this to happen.
ii. Expect at the faucet stem for any bug. In the stalk are ridges and if the ridges are worn down, then there is goose egg to catch a hold of the faucet.
three. Employ an old toothbrush and clean out the debris and whatever deposits and wipe the stalk dry.
iv. You will need thread seal tape and wrap a couple of layers effectually the valve stem tip. Then, accept the handle and printing it in over the stalk through the record. Another way is to but rotate the handle over the stem and allow information technology to lock into place.
5. Call back this is simply a temporary fix and may terminal a month or up to 2 years, but yous will need to supercede the faucet handle.
While you lot are working on a set up for the faucet handle, you might take other dwelling house comeback ideas that pop into your head. In that location are also other maintenance issues you can tackle such as:
Other Maintenance in the Bath
Sink Trap
You might observe that there is a stench coming from the drain in the tub. This tin can be the P trap is dry and as a consequence, is allowing the sewer gases to escape. You will desire to fix this right abroad.
Mold Growing in the Bathtub
This would likewise be a good time to make clean the bathtub well. Look at the white silicone, do you run across mold growing on it? Take the time to make clean this earlier it becomes worse and meet if there is a leak near information technology that needs to be recaulked.
Toilet
Check the floor virtually the toilet and run across if it leaks any water at the base at that place could be a loose seal or caulking that yous need to gear up.
When to Call a Professional
Phone call a professional if you aren't sure why the bathtub faucet won't plough off or need plumbing services. Information technology could be a number of reasons as listed higher up, but you lot tin can ever consult a professional for help.
Conclusion
It can be frustrating not being able to plough off the water in the bathtub and having to shut off the main water supply. With this in heed, attempt the steps above or consult a professional for assistance. Nosotros take a look at bathtub and bath faucets when we are conducting dwelling inspections in New Hampshire and Southern Maine.
Think you might demand one of our services? Comment beneath!
Source: https://alphabuildinginspections.com/bathtub-faucet-wont-turn-off/
0 Response to "what to do when your shower valve wont shut off"
Post a Comment